Homogeneous Charge Compression Ignition (HCCI) holds promise for reduced emissions and increased efficiency compared to conventional internal combustion engines. As HCCI lacks direct actuation over the combustion phasing, much work has been devoted to designing controllers capable of set-point tracking and disturbance rejection. This paper presents results on model predictive control (MPC) of the

This paper shows an application of continuous-time system identification methods to Type 1 diabetes. First, a general MISO transfer function structure with individual nominator and denominator polynomials for each input is assumed and a parameter estimation procedure via an iterative prediction error method presented. Then, the proposed identification method is evaluated on a simple simulation exa

A drilling task requires a mechanism with five degrees of freedom, in order to achieve the correct position and orientation of the drilling tool. When performed with a standard 6-axes industrial robot, this task leaves an extra degree of freedom that can be exploited in order to achieve any additional criterion. Unfortunately, typical industrial robotic control architectures do not allow the user

Modern industrial robots are fast and have very good repetitional accuracy, which have made them indispensable in many manufacturing applications. However, they are usually programmed to follow desired trajectories and only get feedback from position sensors. This works fine as long as the environment is very well structured, but does not give good robustness to objects not being positioned or gri

This contribution reviews theory, algorithms, and validation results for system identification of continuous-time state-space models from finite input-output sequences. The algorithms developed are autoregressive methods, methods of subspace-based model identification and stochastic realization adapted to the continuous-time context. The resulting model can be decomposed into an input-output model

The focus of this article is to undertake a comparative analysis of multi-step-ahead linear multivariate predictors. The approach considered for the estimation will be based on geometrically reliable linear algebra tools, resorting to subspace identification methods. A crucial issue is quantification of both bias error and variance affecting the estimate of the prediction for increasing values of

The well-known and commonly accepted finite dimensional model qualitatively describing surge instabilities in centrifugal (and axial) compressors is considered. The problem of global output feedback stabilization for it is solved. The solution relies on two new criteria for global stability proposed for a class of nonlinear systems exploiting quadratic constraints for infinite sector nonlinearitie

This paper presents theory, algorithms and validation results for system identification of continuous-time state-space models from finite non-uniformly sampled input-output sequences. The algorithms developed are methods of model identification and stochastic realization adapted to the continuous-time model context using non-uniformly sampled input-output data. The resulting model can be decompose

Using methods of system identification and prediction, we investigate near-future prediction of individual specific T1DM blood glucose dynamics with the purpose of a decision-making tool development in diabetes treatment. Two strategies were approached: Firstly, Kalman estimators based on identified state-space models were designed; Secondly, direct identification of ARX- and ARMAX-based predictor

Stability problems associated with robot control with obstacle avoidance are analyzed.Obstacle avoidance algorithms based on potential function are revised to accomplish stable re-design. A stability proof using Lyapunov theory and passivity theory is provided for the re-designed obstacle avoidance algorithm. The paper presents a modification of potential functions for obstacle avoidance aiming to

Control of robotic systems subject to friction phenomena is an important issue since growing demands on accuracy require elimination of friction disturbances. If several modelse.g., friction model, rigid-body dynamicsare required to describe the behavior with high precision, each model requires the knowledge of numerous parameters (perhaps time-varying) as well as an increased number of signals an

To facilitate model-based control of combustion timing and work output in Homogeneous Charge Compression Ignition (HCCI) engines, a cycle-resolved model of HCCI incorporating cylinder wall temperature dynamics is presented. Heat transfer between the in-cylinder charge and the cylinder walls is important for explaining HCCI cycle-to-cycle behaviour but is rarely included in control-oriented models.

Due to the possibility of increased efficiency and reduced emissions, Homogeneous Charge Compression Ignition (HCCI) is a promising alternative to conventional internal combustion engines. Ignition timing in HCCI is highly sensitive to operating conditions and lacks direct actuation, making it a challenging subject for closed-loop control. This paper presents results on model-based control of igni

The paper suggests conditions for presence of quadratic Lyapunov functions for nonlinear observer based feedback systems with an input nonlinearity in the feedback path. Provided that the system using state feedback satisfies the circle criterion (i.e., when all states can be measured), we show that stability of the extended system with output feedback control from a (full state) Luenberger-type o

We study the extension of the class of linear time-invariant open-loop systems that may be transformed into SPR systems introducing a reduced-order observer. It is shown that for open-loop stable systems a cascaded observer achieves the result. For open-loop unstable systems observer-based feedback is required to succeed. In general, any stabilizable and observable system may be transformed into a

This paper addresses the problem of velocity reconstruction of robotic systems with rigid-body dynamics subject to friction. The aim of this paper is to estimate the velocities in the joint of a robot as well as the friction interacting with these velocities. Confronted with friction phenomena interacting with velocity dynamics, we have developed a non-linear observer, partly model-based for estim

In light of the changing circumstances for teaching, teachers’ views on organizational communication processes were explored. Empirically, this paper is based on five semi-structured focus groups, each interviewed on two occasions. In total, 44 primary and lower secondary-school teachers working in one municipality in Sweden participated. The interviews were framed by a pre-survey concerning demog

The Xiamaling Formation in the North China Block contains a well-preserved 1400 Ma sedimentary sequence with a low degree of thermal maturity. Previous studies have confirmed the dynamic and complex nature of this evolving marine setting, including the existence of an oxygen-minimum zone, using multi-proxy approaches, including iron speciation, trace metal dynamics, and organic geochemistry. Here,

The paper suggests conditions for presence of quadratic Lyapunov functions for nonlinear observer based feedback systems with an 'input nonlinearity' in the feedback path. Provided that the system using state feedback satisfies the Circle Criterion (i.e., when all states can be measured), we show that the extended system with only output feedback control from a (full state) Luenberger-type observe