Search results

Creating bimodal grain size distribution in crystalline materials is an effective strategy to improve structural efficiency. Present investigation demonstrates that further control over topology through the formation of bimodal 'harmonic' structure simultaneously increases average values of strength and ductility, reduces the variation of corresponding properties, and thwarts the localization of p

The effects of annealing on the microstructure, texture, tensile properties, and R value evolution of an IF steel sheet after room-temperature symmetric and asymmetric rolling were examined. Simulations were carried out to obtain R values from the experimental textures using the viscoplastic self-consistent polycrystal plasticity model. The investigation revealed the variations in the textures due

The evolution of intermetallic precipitate particles in Mg-Zn-Zr alloy ZK60 during thermomechanical processing by integrated extrusion and equal channel angular pressing was investigated in detail. Electron microscopy was employed to analyse individual particles and their orientation within the Mg matrix, while small-angle X-ray scattering (SAXS) was used for an assessment of global particle behav

Pure copper (Cu) having bimodal 'harmonic structure' (HS) was fabricated by a technique based on severe plastic deformation of powders, which involved tailored mechanical milling and spark plasma sintering. The harmonic-structured Cu demonstrates a unique combination of high strength and large elongation superior to its homogeneous as well as bimodal heterogeneous counterparts. Specific features o

The effect of ultrafine-grained structure formation in Mg-Zn-Zr alloy ZK60 on its mechanical response was investigated at strain rates ranging from quasi-static to dynamic regimes. The study demonstrated that the strength characteristics of the material rise significantly with increasing strain rate, while its ductility is reduced. These effects are particularly pronounced in the dynamic loading r

IF steel sheets were processed by conventional symmetric and asymmetric rolling (ASR) at ambient temperature. The asymmetry was introduced in a geometric way using differential roll diameters with a number of different ratios. The material strength was measured by tensile testing and the microstructure was analyzed by optical and transmission electron microscopy as well as electron backscatter dif

The present study has clarified the roles of dislocation slip and twinning as the deformation mechanisms in magnesium alloys, as well as the effect of grain size on their relative contributions. The details of these mechanisms were studied by monitoring acoustic emission (AE) in conjunction with a novel signal categorization technique in Mg alloy ZK60. Through the analysis of AE time series the se

Materials having bimodal grain structures are known for the good balance of strength and ductility. However, methods for their fabrication often lack the control of such structure characteristics. In this work, the principles of "harmonic" structure fabrication allowing to control both topology and scale of the bimodal structure heterogeneity have been concisely formulated. The feasibility to form

Fatigue performance under axisymmetric push-pull loading of a magnesium alloy Mg-6Zn-0.5Zr (ZK60) after processing by integrated extrusion and equal-channel angular pressing was investigated. Such processing was shown to nearly treble the endurance limit of the alloy, raising it to 160 MPa. It was established that the high-cycle fatigue performance of ZK60 is primarily controlled by dislocation su

High-pressure torsion was used for the deformation processing of high-purity aluminum (4N-Al), while high-resolution electron-backscatter diffraction was used for the analysis of evolution of qualitative and quantitative microstructural characteristics. This study reveals a rather full picture of microstructure evolution in the high stacking fault energy fcc material and makes a continuous link be

In the present work, effects of loading scheme and strain reversal on structure and hardness evolution have been studied by using high pressure torsion (HPT) and twist extrusion (TE) techniques. High purity aluminium (99.99%) was processed at room temperature up to a maximum total equivalent strain of εmax ≈ 8 by TE, and HPT in monotonic and reversal deformation modes with strain increment Δεmax =

In the present study, the effects of kinematic and geometric asymmetries in rolling during multi-pass processing of IF steel are examined. The theoretical investigation by final element simulations and experimental investigations by means of electron-backscatter diffraction analysis and tensile tests suggest that asymmetric rolling increases the total imposed strain compared to symmetric rolling,

Asymmetric rolling (ASR) is a potential process to reach better grain refinement than in conventional rolling, thus, can lead to better mechanical properties. It is not known, however, how the introduction of a shear component will change the ideal orientations of the textures, and consequently, the evolution of plastic anisotropy. To understand the effect of the added shear on texture evolution i

The effect of additional shear on the asymmetric rolling (ASR) of an interstitial-free (IF) steel was studied by modeling and experiments. The asymmetry was introduced by making one roll idle. A 66 pct of total thickness reduction was performed in 6 passes with less than 16 pct reduction per pass. ASR was performed in two ways: monotonically and by rotating the sheet between passes by 180 deg arou

The paper demonstrates the feasibility of upscaling of severe plastic deformation (SPD) techniques using an integrated process that combines conventional extrusion and equal channel angular pressing in a single processing step. The process was applied for production of magnesium ZK60 bars 16 mm in diameter and up to 4 m in length. The processed material exhibited an excellent balance of strength a

Bimodal grain structure was fabricated in a 99.99% purity aluminium by high pressure torsion at ambient temperature in reversal deformation mode at a strain amplitude Δε = 1, strain rate ̇=1.1×10 -1s-1 and hydrostatic pressure P = 5 GPa. Enhanced boundary mobility due to the high purity of the aluminium and homologous temperature coupled with reversal simple shear deformation are found to be respo

It was demonstrated in this work that the corrosion rate of Mg alloy ZK60 can be reduced through the use of an integrated process of extrusion and equal channel angular pressing concomitant with increased strength. The improvement in corrosion resistance, as measured by electrochemical experiments and immersion tests in NaCl electrolytes, was correlated with both grain refinement and the redistrib

As-received hot-rolled 5.6 mm thick IF steel sheet was symmetrically/ asymmetrically cold rolled at room temperature down to 1.9 mm. The asymmetric rolling was carried out in monotonic (an idle roll is always on the same side of the sheet) and reversal (the sheet was turned 180° around the rolling direction between passes) modes. Microstructure, texture and mechanical properties were analysed. The

Among the known severe plastic deformation (SPD) techniques, one particular group can be defined as SPD processing of thin samples. Their distinctive feature is that one of the sample dimensions, namely the thickness, is much smaller than the other two dimensions. Examples include High Pressure Torsion and two recently developed techniques: the Cone-Cone Method and the High Pressure Tube Twisting.

In the present work, effects of loading scheme and strain reversal on structure evolution are studied by using high pressure torsion (HPT) and twist extrusion (TE) techniques. High purity aluminum (99.99%) was processed at room temperature up to a total average equivalent strain of ∼4.8 by TE and HPT with two deformation modes: monotonic and reversal deformation with a step of 12° rotation. It was